Amigo Fiesta III, Owners And Operation Manual

Page: 8 / 18

TAKING YOUR FIESTA APART
The Fiesta can be taken apart easily for transportation or to change the batteries.
To disassemble, use the following procedure:
Remember to turn your Fiesta off first and remove the key.
1. Release Seat Locking Lever shown in Figure 8 and turn the Seat 90˚.
2. Lift seat off unit as shown in Figure 9.
3. Pull up Rear Cover as shown in Figure 10 – this is only
kept on by Velcro. You can also remove the Seat Post.
4. Disconnect the cable to the Rear Lights, this allows
you to remove the Rear Cover completely.
(Figure 11)
5. When you have removed the Rear Cover
you can disconnect the batteries.
(Figure 12)
6. Undo the Strap holding the batteries as shown in Figure 13.
7. Remove the batteries one at a time as they are
relatively heavy.
(Figure 14)
8. When you have removed the batteries, unlock the
Latch at the center of the PMV.
(Figure 15)
9. Grip the Seat Post and pull the two sections apart,
as shown in Figure 16.
10. Take front basket off and fold down the handle. (Figure 17 )
11. You can now store the Fiesta in a car. It is advisable
to seek assistance when loading the Fiesta.
12. Repeat the procedure in reverse to assemble the Fiesta.
8
Disassembled
Figure 8 Figure 9
Figure 10 Figure 11
Figure 12 Figure 13
Figure 14 Figure 15
Figure 16 Figure 17