Amigo Fiesta III, Owners And Operation Manual

Page: 5 / 18

ADJUSTING YOUR FIESTA
To adjust your Fiesta to a comfortable driving position, you can alter the seat,
handle and armrests as follows:
Adjustable Handle
• To adjust the angle of the handle, press the Handle Adjustment Lever down
as shown in Figure 3. Pull the handle toward, or away from you, then release
the Lever when the handle is in the correct position.
Adjustable Seat Height
• To adjust the seat height, remove the seat, as shown
in Figure 4, to expose the Seat Post.
• Pull the Locking Pin out of the Seat Post, as shown in Figure 5, and
pull the inner post up or down to adjust the height position of the seat.
• Replace the Locking Pin ensuring that it is firmly located.
• Replace the seat and ensure the Rotating Lever is locked.
Adjustable Seat Position
• To adjust the position of the seat, lift up the Seat Lever, and slide
the seat forward or backward. (Fiesta IV-12 only)
Seat Rotate Lever
• This allows the seat to rotate 360 degrees and lock in any 45-degree
position desired. The Seat Rotate Lever is a bar with a vinyl cap on its end,
located under the right side of the seat. Pull the Lever up to rotate to
any 45-degree position when handle is released.
Adjustable Armrest Height
• The Armrest height can be adjusted using a 5mm Allen wrench
(arms can be raised either 3/4” or 1-1/2”). Remove 2 screws, lift arm
to desired height, and reinstall screws.
Adjustable Armrest Width
• The Armrest width is determined by loosening the Armrest Knobs
and tightening them when the arms are at correct width.
Flip Up Armrest
• By pulling up on the end of either Armrest, the Armrest will
flip back for easy transfer in and out of the Fiesta.
5
Figure 3
Figure 4
Figure 5