10
Amico Beds Corporation
WARNING:
When changing the stretcher’s position, make sure hands, feet, and equipment are clear of the
stretcher’s frame assemblies. Failure to do so could result in injury or equipment damage.
The Trendelenburg/reverse Trendelenburg function control pedals are located on each side of the stretcher.
TO PUT THE STRETCHER IN THE TRENDELENBURG POSITION
a. Put the stretcher in its raised position (see “Hi-Lo Control” on page 10).
b. Press the Trendelenburg control pedal, and hold it until the desired
angle is reached.
TO PUT THE STRETCHER IN THE REVERSE TRENDELENBURG POSITION
a. Put the stretcher in its raised position (see “Hi-Lo Control” on page 10).
b. Press reverse Trendelenburg control pedal, and hold it until the desired
angle is reached.
TO LEVEL THE SLEEP SURFACE
a. Press the down control pedal to lower the stretcher to its lowest
position. The sleep surface levels automatically.
b. If the stretcher is in the Trendelenburg position, press the reverse
Trendelenburg control pedal until the stretcher is level.
c. If the stretcher is in the reverse Tredelenburg position, press the
Trendelenburg control pedal until the stretcher is level.
Down/Trendelenburg/Reverse Trendelenburg
