![background image](http://html.mh-extra.com/html/amica/wtp-14321-w/wtp-14321-w_operating-instructions-manual_2932443017.webp)
17
USING THE APPLIANCE
II. Set Delay Start
The delayed start function may be used when, for example, taking advantage of dis-
counted electricity tariffs.
Procedure:
1. Close the appliance door.
2. Set the programme selector knob to the desired programme (see the table further on).
3. Select additional functions or drying cycle parameters as required.
4. Press the Delay Start button.
5. Select time ranging from 0 to 24 hours. The display will show the setting from 0H to
24H.
6. Press the [Start/ Pause] button. The appliance will be set in delay mode. Drying cycle
will commence immediately after the delay time has elapsed.
Note
: If you set delay start, the display will show the time remaining to start the drying
program.
III. End of drying cycle
1. Once the programme is complete drum will stop rotating and the display shows "0:00".
The last programme phase indicator will flash. If you do not remove clothes from the
dryer with a specified time, the appliance will start the [Anti-Crease] programme. Press
[On/Off] and remove the plug from the wall outlet.
2. If the appliance suddenly stops during the drying programme and displays an error
message, follow the information in the "Troubleshooting" section.
IV. Cancel or modify programme
Press the On/Off button to interrupt the programme. Then press on/off button again to
turn on the appliance and select the desired drying programme.
I. Select Programme
1. Press [On / Off]. When the LED display lights up turn the programme selection dial and
select the desired programme
2. Select the additional option [Delay Start], [Drying Time], [Drying Intensity] or [An-
ti-Crease] — if the programme allows you to select additional options.
3. Press the [Start/ Pause] button
Summary of Contents for WTP 14321 W
Page 24: ......