56
OPERATION
Automatic warm-up function
• Select the required cooking zone (
3
) so
that the display shows „
0.
” (the dot is
on).
• Select the heat setting „
9
” by sliding your
finger across the heat setting selection
sensor field (
2
).
• Touch the heat setting selection sensor
field (
2
) again to confirm the selected heat
setting „
9
”. The display will immediately
show the letter „
”
• Now, select the desired heat setting by
sliding your finger across the heat setting
selection sensor field (
2
).
The display of the relevant cooking zone will
alternate between showing the letter „ ” and
the desired heat setting selected.
After a certain time of operation at boosted
power, the cooking zone switches back to
the heat setting set, which will be shown
on the display.
If automatic warm-up function is
activated and „0” heat setting is
selected or no heat setting selec-
tion is made within 3 seconds, the
automatic warm-up function will
deactivate.
If a pot is lifted from the cooking
zone and replaced before the warm-
up countdown is completed, the
warm-up function will resume
and countdown will continue until
completed.
Heating power
Automatic extra
warming duration
(minutes)
-
1
0,8
2
2,4
3
3,8
4
5,2
5
6,8
6
2,0
7
2,8
8
3,6
9
0,2
A
A
3
2
3
2
