53
OPERATION
Setting the child lock function
The Child Lock function protects the appliance from inadvertent operation by children. The
appliance can be operated once the child lock function has been released.
The child lock function
The child lock function can only be set when
the appliance is switched on and none of the
cooking zones or timer is in operation (all
displays show „
0
” and dots are a flashing).
To set the child lock function switch the ap-
pliance on using the on/off sensor field (
1
),
simultaneously touch the front right cooking
zone selection sensor field (
3
) and booster
function sensor field (
6
) and once again touch
the front right cooking zone selection sensor
field (
3
). All displays will show the letter „
L
”
(
Locked
), which indicates that the Child Lock
function has been set. If cooking zones are
still hot, the display will alternate between
showing the letters „
L
” and „
H
”.
If activating Booster function cau-
ses the overall power limit of a pair
to be exceeded, the heat setting of
the other cooking zone in a pair
will be automatically reduced.
The amount by which power is
reduced depends on the type of
pot used.
Booster function control
Booster function can be activated on all
cooking zones.
Two left cooking zones and two right cooking
zones are paired (see figure) Booster function
can be activated at any time for one cooking
zone in a pair.
The Child Lock function must
be set within 10 seconds and no
sensor fields other than those
described above must be touched.
Otherwise the Child Lock function
will not be set.
1
6
3
