17
Appliance's parts (Fig. 1).
1. Spout
2. Body
3. Water gauge
4. Lid
5. Lid button
6. Handle
7. Switch
8. Base
THE APPLIANCE’S CONSTRUCTION AND FEATURES
Before use:
If you are using the kettle for the first time, it is recommended that you should clean your kettle before
use by boiling the Max capacity of water once and then discarding the water twice.
NOTE: The max capacity of kettle is 1.7L.
Use:
1. Place the kettle on the flat surface.
2. To fill the kettle, remove it from the power base and open the lid by pressing down lid release but
-
ton, then fill the kettle with the desired amount of water and close the lid. The water level must be
within the Min and the Max level. Too little water will cause the kettle switching off before the water has
boiled.
NOTE:
Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before plugging the power outlet.
3. Position the kettle on the power base.
4. Connect the plug into a power outlet. Press down the switch and the indicator will light up, and then
the kettle starts to boil the water. The kettle will switch off automatically once the water has boiled. If
necessary, it will take you 30 seconds to wait before pressing the switch again to re-boil the water. You
may shut off the power by lifting switch up or directly lift the kettle from the power base at any moment
to stop boiling process.
NOTE:
Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if
the switch if be constrained or if the lid is opening.
5. Lift the kettle from the power base and then pour the water.
NOTE:
Operate carefully when pouring the water from your kettle as boiling water may result in scald,
besides, don’t open the lid while the water in the kettle is hot.
6. The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power
base when not in use.
NOTE:
Always disconnect the power supply when not use.
Should you accidentally let the kettle operate without water, the function of boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool prior to filling with cold water
before re-boiling.
OPERATION, CLEANING AND MAINTENANCE
