16
OPERATION
Change the beep tone
You can change the beep tones as follows:
l
simultaneously touch the
<
/
>,
sensors
l
Touch
MENU
repeatedly to select the
ton
(tone). The display will be flashing:
l
Use the
<
/
>
sensors to select your pre-
ferred tone:
Use
>
to select the setting 1 to 3
Use
<
to select the setting 3 to 1
Adjust display brightness
You can adjust display brightness 1 to 9,
where 1 is the darkest and 9 is the brightest.
The brightness setting applies to an inac-
tive control panel, i.e. when no controls are
touched for 7 seconds.
You can adjust display brightness as follows:
l
Simultaneously touch the
<
/
>
sensors,
l
Touch
MENU
repeatedly to select the
bri
(brightness) setting — the settings can
be accessed in sequence
ton
(tone) and
bri
(brightness).
The OpenUp! function
This function allows you to open the oven
door by touching the handle. There are two
opening modes to choose from – One time
and Always. In On-time mode you can touch
the handle to open the door once only each
time you set a heating function. In Always
mode you can always touch the handle to
open the door when you set a heating func-
tion.
IMPORTANT: The OpenUp! function is not
available when:
•
Function knob is set to “0.”
•
The appliance is Power On mode.
•
Pyrolytic cleaning is in progress (ovens
with pyrolytic cleaning function).
To enable the function touch and hold
MENU
until the
message is shown on the
display. Use the
<
and
>
to select on of the
following:
•
One Time OpenUp!
•
Always OpenUp!
•
Disable OpenUp!
To open the oven door, touch the metal strip
of the oven door handle. You need to touch
the handle for at least 0.5 second. The sen
-
sitivity of the handle allows you to open the
door with your hand or a covered part of the
body, e.g. the elbow or the knee.
Regardless of the OpenUp! settings, the
door can be opened manually in any situa-
tion by pulling the handle.
Note: When OpenUp! function is active in
Always mode, door can be easily opened
inadvertently. We recommend to closely
supervise children or to deactivate the Ope-
nUp! function.
