37
Tip 1: The strong coffee button is recommended for espresso Both coffee modes are adjustable.
Tip 2: Automatic rinsing will not take place if the appliance is turned off and on again. You can
disable or enable this feature by following the steps below.
Step 1. Remove the service lid
Step 2. Press the on / off button until you hear a beep.
Note! Press the hot water button to rinse the inside of the coffee maker before first use.
OPERATION
VII. MAKE FROTHED MILK FOR COFFEE (Fig. 7):
As the temperature of the steam is higher than the temperature of the espresso, prepare your coffee
before making frothed milk;
1. Prepare coffee in a large cup.
2. Turn the steam wand towards the drip tray.
3. Press the steam button
. The steam indicator will start flashing. The appliance then heats up and
drains the remaining water into the drip tray or other container.
4. When the steam indicator stops flashing, place the cup of milk under the steam wand and immerse
the steam wand about 5 cm into the milk.
5. Press the steam button again.
6. Keep rotating the cup while the hot steam is ejected.
7. When the milk is hot enough, froth will appear. Then press the steam button again to turn off the
steam.
8. Use a wet cloth to clean the wand cap and metal tube. (See “DAILY CLEANING”)
9. Pour hot frothed milk into the coffee.
10. Now you can enjoy your coffee.
7