14
Load articles into the drum observing the following in structions:
cotton – maximally full drum (do not force articles into the drum as it
may reduce the washing efficiency!).
synthetic – maximally 1/2 drum
wool, silk, delicate fabrics maximally 1/3 drum
Warning! Do not overload the appliance! Overloading may cause dam
ages to the washed articles!
The electronic control device includes a load distribution control sys
tem. If the system detects uneven distribution of load in the drum, the
appliance will try to relocate the load before spinning. If several trials
prove un sat is factory, the appliance will automatically decrease the
spin speed or refuse spinning.
Uneven distribution of load may be caused by:
too large load
too small load
a single article (for example a ballshaped sheet that closes several
other articles inside itself)
Fabric softeners added for rinsing:
Observe the manufacturer recommendations.
Pour softener into the middle chamber marked with symbol.
Do not exceed the MAX level marked on the drawer chamber.
The softener will be added in the last rinse.
Starch
Observe the manufacturer recommendations.
Starch using “Conditioning” programme
Pour starch into the middle chamber marked with symbol.
Liquid washing agents
Insert partition into the main wash chamber marked with symbol.
Fill the dose of the liquid washing agent recommended by the manu
fac turer into the chamber.
Programme
Select a suitable washing programme (Synthetic, silk, wool, delicate
fabrics).
Load
See point VI “Load”
VI. Load
VII. Even load
distribution
control
VIII.
Washing agents
and conditioners
IX.
Delicate fabrics
