11
PrAcTicAl WAShing hinTS
If you want to stop a programme, keep pressing START
button until READY lamp is lighted.
If you want to change a programme when the appliance
is in operation, first stop the current pro gramme by press
ing START button (see above) and then select an other
pro gramme.
Warning! The set up temperature and number of ro tations
as well as the selected programme may be changed only
when READY lamp is lighted. If IN OP ERATION or FINISH
lamps are lighted, the changes will not be introduced.
If the programme selector knob is in position other than the
run programme, IN OPERATION lamp will be flashing until
the knob is properly positioned.
If you change position of the programme selector knob
without cancelling the programme, the run programme will
still not be changed.
The appliance is equipped with a lock, preventing the door
from being opened during operation.
The lock is active when:
a.) IN OPERATION lamp is lighted (the appliance is wash
ing)
b.) FINISH lamp is lighted and “ “ symbol flashes
in turns with the error sign (see page 9)
c.) READY lamp is lighted and “ “ symbol flashes
(after the programme has been cancelled).
To open the door proceed as follows:
- wait 2 minutes until “ “ stops flashing or
switch off the appliance using the button and wait
approx. 2 minutes.
Warning!
If the programme has been stopped during
washing and the temperature inside the drum is high,
the door may remain locked until the tem pera ture drops
below 60° C.
(programme memory)
It you pull out the mains plug or there is a power failure, the
current programme will not be can celled. It will be re mem
bered and continued once the power supply appears.
I. Cancelling and changing the pro-
gramme
II. Door lock
III. Power failure
