Amica AWM712D, Instruction Manual

Page: 7 / 24

7
The outlet hose is at the back of the
machine. Fix the outlet hose so that it
does not move while the machine is
in operation (use the elbow as shown
below). Do not place the hose too deep
into the outlet pipe!
max 100 cm
min 60 cm
III. Connecting the water supply
IV. Water outflow
V. Connecting the electric power supply
A supply hose with seals is inside the drum of the machine.
INSTALLING THE MACHINE
Water pressure min 0.1 MPa (1 bar), max 0,8 MPa (8 bar).
Supply the machine with cold water Important points:
l
after connecting, make sure the hose is not twisted
l
after connecting the hose and the valve, check they are sealed tight
l
regularly check the condition of the supply hose.
Use the new hoses sup-
plied with the machine.
Do not re-use hoses.
l
Connection of the washing machine to the mains (plug-in soc-
ket in the electrical installation) should be at a conspicuous and
accessible place!
l
Connect the washing machine only to the correctly installed
and earthed socket
l
Do not use an extension cord
l
Broken power leads, may be replaced only by authorised se-
rvicemen
l
Type of the power lead – H05VVF – 3G1.5
l
Catalogue number of the power lead: 8017546