Amica AWM712D, Instruction Manual

Page: 10 / 24

10
5. Water temperature button
This button allows the washing temperature to be set. Press this button to display water
temperature settings available for a given programme or an option for washing in cold
water (no heating).
6. Spin speed button
Press this button to set the spin speed when water is being pumped out of the washing
machine. Press the button to change the setting.
7. Start delay button
Press this button to set the delay time for starting washing. The setting range available is
from 1-24 hours. Press and hold the button to set the time after which washing is to com-
mence.
Important! If there is a power outage during Delay Time, countdown will resume immedia-
tely after the power is restored.
DESCRIPTION OF CONTROL PANEL
4. Eco function button
The Eco function allows water use to be adapted to the amount of dirt on the clothes being
washed. When a programme is selected, the appliance will indicate optimum water quan-
tity required to wash a given type of laundry. Press the Eco, button to modify the quantity
of water depending on how dirty the laundry is. Increase the quantity of water for a heavily
soiled laundry.
The pause mode can be used to soak the laundry.
Once the selected programme started wait for about 10 minutes and then press the
START/PAUSE button. When the laundry is soaked as required, press the START/PAUSE
button again to resume the program. Soaking will improve washing efficiency for heavily
soiled laundry.
2. Programme selector knob
Choose the appropriate cleaning wash programme as required, depending on the degree
of dirt, and type and amount of laundry loaded, which ensures better results and more ef-
fective washing. Once the cleaning programme is started, turning the programme selector
knob to another position is indicated by an acoustic signal however it does not change the
previously selected programme.
3. START/PAUSE button
The [Start/Pause] button is used to start and pause the appliance.
During a wash cycle the relevant symbol is flashing indicating a given wash cycle phase
([PRE-WASH], [WASH], [RINSE], [SPIN]).
In pause mode, the symbols do not flash and are lit up continuously.