![background image](http://html1.mh-extra.com/html/amica/awi912db/awi912db_instruction-manual_2932851016.webp)
16
USING THE APPLIANCE
II. Start delay setting
The delayed start function may be used when, for example, taking advantage of
discounted energy tariffs.
Procedure:
1. Close the door.
2. Set the programme selector knob to the desired programme (see the table further on).
3. Select additional functions or wash cycle parameters as required.
4. Press the Delay button.
5. Select time ranging from 0.5 to 23 hours. The display will show the setting from
30 min. to 23h.
6. Press
Start/Pause
button. The appliance will be set in delay mode. Washing will
commence immediately after the delay time has elapsed.
III. End of the wash cycle
1. When the wash programme has ended, End appears on the display.
2. Turn off the water valve
3. Set the programme selection knob to .
4. Unplug the appliance from the mains.
5. Open the door and remove laundry.
IV. Cancelling and changing programme
Set the programme selector knob to position for several seconds to terminate a
programme. Then select the desired wash programme.
NOTE:
When you cancel a programme when there is water in the drum and turn
the programme selector knob to a different position, the appliance will drain
the water.
Then select the desired wash programme.
I. Select Programme
1. Set the programme selector knob to the desired programme (see the table further on).
2. Change temperature, spin speed or activate available additional functions to modify
the programme to your individual needs.
3. Press
START/PAUSE
button.