16
PRACTICAL ADVICE REGARDING WASHING
Cleaning agents
l
Follow the manufacturer’s instructions.
l
Pour the cleaning agent into the drawer chamber marked
l
Pour the pre-wash cleaning agent into the drawer chamber
marked
Fabric softeners added to the rinse
l
Follow the manufacturer’s instructions.
l
Pour the fabric softener into the drawer chamber marked
l
Do not exceed the maximum level marked on the container
chamber. This agent will be used for the final rinse.
Before washing for the first time, put it through one high tempera
-
ture cycle without a load, according to the following procedure:
l
Connect the washing machine to the electricity mains.
l
Turn on the water valve
l
Set the programme selector knob to high temperature wash.
l
Add the appropriate detergent and press the [Start/ Pause]
button.
I.Cleaning and
purifying agents
II. First wash
Reducing energy and water consumption
I. Cleaning and purifying agents
Garments which are only slightly dirty should be washed using the
appropriate wash programme, i.e. ULTRA SHORT Extra rinsing is
not necessary when the optimum amount of cleaning agent has
been used.
IV. Conservation
Stubborn stains
Before washing garments, apply an additional stain remover ac-
cording to the instructions Heavily soiled laundry.
l
One-off washing of smaller amounts of clothes.
l
Add more cleaning agent.
l
After washing very dirty clothes (e.g. working clothes) or garments
which are shedding fibres, it is recommended that the washing ma
-
chine is rinsed out by running a programme cycle at a temperature
of 60°C, without a load, e.g. COTTON or SYNTHETICS.
Light dirt
l
See pt. „Conservation”.
III. Dirt
Summary of Contents for AWE512L
Page 21: ...21...
Page 22: ...22...
Page 23: ...23...
Page 24: ...Service Help Line For the UK please call 0844 815 8880 0818 46 46 46 For Ireland please call...