Pralka 15
PracTical WasHinG HinTs
DELAYED WASH
This function enables pre-programming of the washing machine, so that the programme could
be started automatically at a later userdefined time (from 0.5 to 24 hours). Within 0.5 to 3
hours, it is possible to set the delay time every 30 minutes. Within 3-24 hours it is possible
to set the delay time every hour. If the delayed wash is switched on at the time when 0:00
is flashing, push the START button once again until the time when instead of the flashing
zeroes the standard value 00:30 specifying the wash delay appears. Each time the button
is pushed, the delay is prolonged by 30 minutes or one hour. The maximal delay of the start
amounts to 24h. After 5 seconds from the last push of the button, the washing machine starts
counting the delay time.
CAUTION! If power failure occurs during the delay time count, the function will be automa-
tically cancelled and the washing machine will not be in operation. Switch it on manually or
set the delay time again!
SIGNALLING THE CHANGED POSITION OF THE PROGRAMME SELECTOR
If the present position of the knob is different than the recently remembered programme, the
“Pxx” symbol is indicated on the “time” display, where xx means the number of the remembered
programme. If the position of the knob and the number of the remembered programmed are
correct, the time left till the end of the wash is shown on the display.
ENDING THE WASHING PROGRAMME
After the washing programme is completed, the appliance signals this fact by the appearance
of the word “END” on the display.
