Pralka 13
V. Control elements of the washing machine
Roughly estimated time until the end of a washing cycle
Time displayed on the clock is only a forecast and may be different from the real
washing time, depending on water temperature and pressure, load size and amount
of dosed washing powder. Time is automatically updated during washing; momentary
stoppages and leaps of time are permissible.
Spin rotations adjustment
Pushing the button “spin rotations” causes cyclic changes in the settings. The following
settings of rotations are possible:
l
For cotton, cotton spinning, cotton rinsing programmes: 1400, 1300, 1200, 1100,
1000, 900, 800, 700, 600, 500, 400, 100
l
For Everyday programme: 1000, 900, 800, 700, 600, 500, 400, 100
l
For Synthetics, Super Short, Delicate, Wool, Delicate Rinsing, Delicate Spinning
600, 500, 400, 100
The more delicate is the fabric, the lower spin rotations should be set. The scope of
regulation of the Spin rotations is specified in the “Washing programmes table”.
PracTical WasHinG HinTs
l
”Extra rinse” or
It adds one ( ) or more ( ) rinses to the selected washing programme.
This function is particularly useful in the case of water of high hardness. It improves
effectiveness of rinsing, but increases water consumption. This function is recom-
mended while washing clothes for allergy sufferers.
l
„Eco”
It shortens the washing time by about 30% and reduces the general number of
rinsing cycles by one. This function is useful in the case of washing lightly soiled
clothes. Less washing agents are applied and power and water are saved. An
exemplary washing time with the activated “ECO” function:
l
For EVERYDAY programme – 32 min.
l
For MANUAL programme – 83 min.
additional functions
Door interlock
spin rotations re-
gulation section
Errors
Time section (the rough time
necessary to finish or to start the
washing)
Additional functions
Delayed washing
symbol
Washing program
progress level
