13
Care and cleaning
IMPORTANT:
Always disconnect the appliance from the mains
electrical supply before any cleaning or maintenance.
Removing the shelves (AWC300 & AWC600)
•
To remove a shelf from the AWC300 or 600, first remove all
bottles from the shelf, then pull the shelf forwards until the groove
on either side of the shelf is
level with the plastic peg on
either side of the cabinet (as
shown in Fig 2). Then lift the
shelf up and pull forwards.
•
To replace the shelves,
follow the steps above in
reverse order.
Cleaning
•
Do not use abrasive products or detergents
. After washing,
rinse and dry thoroughly.
•
The exterior of the appliance and the door seal should be
cleaned using mild soapy water and dried thoroughly.
•
The interior cabinet should be cleaned regularly using a solution
of bicarbonate of soda and lukewarm water.
•
Clean the shelves separately by hand using soap and water. Do
not put them in the dishwasher.
•
Ensure that the cloth is only moist when cleaning the control
panel and electrical parts, and that all water is thoroughly dried
off before reconnecting the power
.
•
Once cleaning is complete, reconnect the mains electrical supply.
•
If the appliance is not to be used for prolonged periods of time,
unplug and clean the appliance thoroughly. and ensure dry. The
door should be left slightly ajar to prevent the formation of odours,
mould or condensation.
Fig. 2