26
CLEANING AND MAINTENANCE
Oven is equipped with liners covered with
special self–cleaning enamel. The enamel
removes fat stains or leftover food auto-
matically, providing they are not dried on
and burnt (food and fat remnants should be
removed when they are not dried on and
burnt to avoid a long self–cleaning process).
To activate self–cleaning switch on the oven
for 1 hour, setting the temperature to 250°C.
If remnants of food are small the process can
be shortened.
If the self-cleaning per for mance is no ticeably
reduced, replace the liners with new ones:
take out the wire rails from the in side and
unscrew the catalytic enamel screw from
the center of the liner. New liners can be
obtained at service outlets.
Removal of catalytic liners
Removing wire shelf supports
Installing wire shelf supports
1
2
1
2
Oven is equipped with easily removable
wire shelf supports. To remove them for
washing, pull the front catch, then tilt the
support and remove from the rear catch.