19
OPERATION
Digital clock and minute minder
Set current time
When the appliance is plugged into the elec-
trical mains supply, or when power is restored
after power outage, the digital display will
show flashing 0.00.
press the
OK
, button, then the display will
show flashing dot between digits,
set the current time using the
<
>
buttons.
To store the new time setting, wait approxi-
mately 7 seconds after time has been set.
Dot will stop flashing.
Time setting can be adjusted later by pressing
the
OK
button, dot will start flashing. Time set
-
ting can be adjusted as long as dot is flashing.
To set kitchen timer:
press the > button, then the display will
show flashing icon:
set time on kitchen timer using
<
>
but-
tons.
The time set and the icon is shown on the
display.
Once the set time elapses, alarm sounds and
the
icon flashes,
press the
>
or
OK
button to mute the so-
und. The
icon will be off and the display
will show the current time.
If no button is touched, alarm will turn off
automatically after approximately 7 minutes.
Timer setting may be cancelled at any time:
press the
OK
button to select the kitchen
timer,
simultaneously press the
<
>
buttons.
OK
OK
- button to select mode of operation
>
- plus button
<
- minus button
- Minute minder
Display Tab 1
OK
OK
- button to select mode of operation
>
- plus button
<
- minus button
- Minute minder
Kitchen Timer
The timer can be activated at any time. Timer
setting range is up to 99 minutes and 50
seconds, with 10 seconds resolution.
Display Tab 2