14
OPERATION
Operate the control panel
Set current time
When the appliance is plugged into the elec-
trical mains supply, or when power is restored
after power outage, the digital display will
show flashing 0.00
OK
- button to select mode of operation
>
- plus button
<
- minus button
- appliance on indicator
- Minute minder
- Duration
- End Time
press and hold
OK
(or simultaneously the
buttons
<
/
>
)
until you will see on the
display and the dot below the symbol is
flashing,
press and hold the
<
/
>
buttons within 7
seconds to set the current time.
To store the new time setting, wait approxi-
mately 7 seconds after time has been set.
The dot below the
symbol will stop flashing.
OK
You can adjust the time later. To do this, press
the
<
/
>
buttons simultaneously and adjust
the current time while the dot below the
symbol is flashing.
Note:
The oven can be turned on when you see the
symbol on the display.
Minute Minder
You can active the Minute Minder at any time,
regardless of the status of other functions.
The Minute Minder can be set from 1 minute
up to 23 hours and 59 minutes.
To set the Minute Minder:
press the
OK
button, then the display will
show flashing symbol:
Use the
<
/
>
buttons to set the Minute
Minder. The display will show the set time
and Minute Minder symbol . Once the
set time elapses, alarm sounds and the
flashes
Press and hold
<
/
>
or
OK
to mute the
alarm. The
will be off and the display will
show the current time after approximately
7 seconds.
Note!
If no button is touched, alarm will turn off
automatically after approximately 7 minutes.