Outdoor LoRa Data Logger
26
Now, you can power on the OOT550 with Power Switch (
S2
). Switch it to the lower side (ON) and the OOT550
is powered on and start to boot up.
Then you can check the Status LED, it starts with RED light(LED1) and BLUE light(LED2) for 1~2 seconds. After a
while, LED1 and LED2 will turn to OFF state , and the device is booting up. Finally, It will get reay and you can
see the LED2 with BLUE light flashing once per second.
@ Power OFF @ Boot up and get ready
Note
: If the OOT550 is powered with battery source, the LED will be forced to OFF state while the device get
into sleep mode.
