Quick Start Guide
EL-SIE
For full information about
your data logger visit
www.lascarelectronics.com
and navigate to the product
page of your logger.
The data sheet is in
the Resources section.
2 x AAA Batteries: The unit is powered
when the batteries are installed. Use AAA
1.5V alkaline batteries only, these are user
replaceable.
Loosen the screws and remove the end
cap, then fit the batteries in the orientation
shown on the label. Replace the end cap
and tighten the screws carefully until
secure.
All the software needed to configure your EL-SIE, view and analyse the data it logs, is contained within the
product itself.
1. Connect the logger to your computer using the USB cable supplied
2. Open your web browser and into the address bar type http://EasyLog.local
3. The EL-SIE home page will load – save it to your Favourites or Bookmarks
4. Follow the on-screen instructions to configure and start logging
5. Disconnect the logger and position it where you want to take readings
Once the logger is running you can plug it back into your computer and, without having to stop it logging,
view the data recorded so far. Just select http://EasyLog.local from your Favourites and click on View/Save
Data.
Connect to your PC or Mac
Install the Batteries
Getting to Know Your EL-SIE Logger
EasyLog Cloud Data Storage
Store your data securely, and make it available from
any internet-connected computer or mobile device, with
EasyLog Cloud. The EL-SIE can send logged data to the
Cloud from your computer or Mac,
making sharing and analysis easier
than ever. For more information and to
set up an account on EasyLog Cloud,
visit www.easylogcloud.com.
CALIBRATION CERTIFICATES AVAILABLE
Lascar offers a Traceable Calibration Certificate Service on Temperature Data Loggers. Using reference equipment
which has been calibrated by a UKAS/NIST/CNAS accredited laboratory and using apparatus traceable to national or
international standards. For more information please see
www.lascarelectronics.com
.
Function
Buttons
Status
LEDs
Display
Access
Screws
USB
Port
Sensor
