Amibot glass AG31, User Manual

Page: 18 / 125

16
Troubleshooting
EN
The robot does not
work correctly after
being switched on. There is a problem
with the edge detection
sensors.
1. Check that the cleaning
pad is correctly attached
to the Velcro fastenings
without overlapping the
edge sensors.
2. Contact the AMIBOT
after-sales service if the
edge sensors do not
work correctly.
The top and bottom
indicator lights flash
RED, the robot beeps
continuously.
The robot is not
connected to the power
adapter correctly.
Check that the robot is
connected to the power cable
correctly and that the power
cable is plugged in correctly.
The bottom and
top indicator lights
flash RED and BLUE
successively.
There is a problem with
the motherboard. Contact AMIBOT after-sales
department.
The remote control
does not work.
1. The batteries
are not installed
or need to be
replaced.
2. The remote control
is broken.
1. Change the batteries.
2. Replace the remote
control for a new one.