amiad Omega 13.5K, Installation & Operation Manual

Page: 55 / 93

O M EG A F i l t e r s – I n s t a l la t io n & O p e r a t io n M a n u a l P a g e 4 o f 3 6
Maintenance
Equipment and Materials
ID Tool / Jig Description Figure
TL-10
Combination Wrench:
10, 12, 13, 14, 15, 16, 17, 18, 20, 21,
22, 27, 30, 33, 36, 5/8, 7/8
TL-11 Flat Screw Driver: 6mm wide
TL-12 Long Nose Plier
TL-13
Pin Punch:
3mm, 5mm,6mm, 8mm
TL-14 IRON Hammer: 1kg
TL-15
Eye Bolt:
M6 x3, M10 x3, M12 x3
TL-16 Seal Extractor
TL-17
Open End Torque Wrench:
Torque Range: 7-1350 Ft-Lb
TL-18
Tight-Access Offset Sockets (1/2"
Square Drive):
5/8, 7/8, M12.
TL-19
Lifting Device with Minimum lifting
capacity of 1500 Kg
Table 2 - Tools and Equipment List