7 - Belt Drive
When using pulley or belt coupling the following must be
observed:
9
Belts must be tighten just enough to avoid slippage when
running, according to the specifications stated on the belt
supplier recommendation.
8 - Connection
W
W
W
W
WARNING
ARNING
ARNING
ARNING
ARNING: Voltage may be connected at standstill inside the
terminal box for heating elements or direct winding heating.
W
W
W
W
WARNING
ARNING
ARNING
ARNING
ARNING: The capacitor on single-phase motors can retain
a charge which appears across the motor terminals, even when
the motor has reached standstill.
W
W
W
W
WARNING:
ARNING:
ARNING:
ARNING:
ARNING:
Excessive tension on the pulleys
will damage the bearings and lead to
a probable shaft rupture.
Voltage and connection are indicated on the nameplate.
The acceptable voltage variation is ± 10%, the acceptable
frequency variation is ± 5% and the total acceptable variation
is ± 10%.
9 - Starting Methods
The motor is rather started through direct starting. All Weg
motors must be connected as shown on the motor nameplate,
failure to follow the motor nameplate could lead to motor failure.
A WRONG CONNECTION CAN BURN THE
MOTOR.
