AMI Mark IV Screamer, Manual

Page: 31 / 93

Step 10 Install Hard Disk Drive
The hard disk drives should be attached to the chassis using
the mounting hardware supplied with the drives or the chassis.
The drives need mounting guides before they can be attached
to the chassis. Mounting guides should be supplied with either
the drive or the chassis. Attach the cable to a hard disk
controller card.
Hard Disk Drive Connector Pinout
Pin Use Pin Use
1 -RESET 2 GND
3 DATA7 4 DATA8
5 DATA6 6 DATA9
7 DATA5 8 DATA10
9 DATA4 10 DATA11
11 DATA3 12 DATA12
13 DATA2 14 DATA13
15 DATA1 16 DATA14
17 DATA0 18 DATA15
19 GND 20 KEY (N/C)
21 N/C 22 GND
23 -IOW 24 GND
25 -IOR 26 GND
27 N/C 28 ALE
29 N/C 30 GND
31 INT14 32 -IOCS16
33 HA1 34 N/C
35 HA0 36 HA2
37 -CS0 38 -CS1
39 -IDEACT 40 GND