Doc No. 740123
15
MODEL 8 SERIES WELD HEAD
OPERATION MANUAL
9.0 RETURN-TO-HOME (ROTOR) POSITION ADJUSTMENT
(cont’d.)
Fig. 16
Should your Model 8 require return-to-home adjustment, follow these steps:
9.1 Be sure the power supply is either turned off or in the “TEST” mode.
9.2 Remove the access plate. See fig. 17.
9.3 Loosen the screw that holds the bracket attached to the return –to-
home limit switch. See fig. 17.
9.4 Slide the limit switch bracket slightly toward the rotor, (to stop the rotor
sooner) or slightly away from the rotor (to stop the rotor later) and re-
tighten the bracket screw.
Fig. 17
