24
Regulatory information
The installation of the insert must take place in accordance with each country’s laws and
regulations. All local ordinances, including those that refer to national and European
standards, must be complied with when products are installed.
The installation can only be taken into use after it has been checked by a qualified inspector.
A rating plate made of a heat-resistant material is fixed to the heat shield. This provides
information on identification and documentation of the product.
The room or space containing the insert shall have a permanent air supply to ensure proper
combustion, to determine correct amount of air supply use current edition of Building
Regulations.
Remember to use only for the appliance recommended fuel as wood logs or smokeless fuel
as anthracite or manufactured smokeless fuel briquettes. Do not ever burn bituminous coal,
“petro-coke” or other petroleum based fuel
2.0 Technical data
Output 4-7 kW
Nominal output 5 kW
Efficiency level Up to 80%
Model 5i
Weight (kg) 80 ; Width (mm) 505 ; Depth (mm) 440 ;
Height (mm) 632
Model 5i-3-sided frame
Weight (kg) 79 ;Width (mm) 505 ; Depth (mm) 440;
Height (mm) 610
Model 5i Classic
Weight (kg) 125; Width (mm) 478 ; Depth (mm) 440;
Height (mm) 613
The connector’s inner diameter is Ø125 mm
Type approved in accordance with:
European standard EN-13 229 (DE/A) DINplus, Art. 15a B-VG RRF-29 11 2751
Technical data in accordance with EN 13229
Nominal heat output: 4.9kW
Efficiency: 879.8 %
CO emissions (13% O2): 0.1 %
OGC emissions (13% O2): 66 mg/Nm3
Dust emissions (13% O2): 17 mg/Nm3
Flue gas temperature: 249 °C
Chimney draught, EN 13229: 12 Pa
Recommended draught with smoke outlet: 14-17 Pa ; Fuel consumption: 2 kg/h
Operation: Intermittent
