AMGO MR06, Installation And Service Manual

Page: 14 / 20

12
Illustration of hydraulic valves
Single phase 110 V ,60 HZ Manual power unit(Fig.16)
V. OPERATION INSTRUCTIONS
1. Install the oil hose between oil cylinder and power unit, connect with the power
supply wire well. The machine can be ready to use.
2. When lifting vehicle, be sure the center of gravity of vehicle must be in the middle
of lift, select the suitable adapters and move the arms to find the support point.
（
See Fig.17,18
）
Make sure the safety lock must be in engaged when lifting
(See
Fig. 19)
.
3. Lower the lift: Press the button “ UP”, until the safety lock is in released position
clench the brake handle (See Fig.20,21),
lower the lift by pushing lowering handle.
Fig. 17 Fig.18
Fig.16
Relief valve
Throttle valve
Release valve
Oil outlet
Oil return port
Pull cable to move supporting arm Relax cable to fasten supporting arm
Check valve
Handle for
release valve