AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 12 of 16
AMG3608BERN-DR-SF Instruction
Sheet D18195-02.doc
Network Management
Network Management of the system is provided by the AMG Management Interface which allows
Management using the AMG SNMP enabled Management software.
NMS Operation
Requires Network Management "N" option in each Rx (Receive) or Tx (Transmit) unit.
Recommended for Dual Redundant Options to give knowledge of failure
Rx collects information regarding all attached Tx units
Interface
9 Way D-type management port on each Rx or Tx
RS-232 or RS-485 on Management Port
Multiple Rx/Tx units use RS-485 and effectively parallel all the RS-485 ports together
Connect to PC RS-232 Port via RS-485/RS-232 convertor
Proprietary GUI
Loss of unit
Loss of Optical Input
Loss of Video Input
SNMP
SMNP Compatibility: SMNP Version 1
AMG3700 Device do NOT act as SNMP Agents
PC running AMG NMS software is the only 'true' SNMP Agent
Provides Proxy access to all AMG devices
SNMP Community String used to differentiate between AMG devices
Network Alarm Port
Alarm Output: Normally Closed
Opens when loss of :
Video at any insert node
Primary optical input at any node
Secondary optical input at any node
Any node through a power down
Power at the receiver
Closed by: Reset
The Management Interface
The Management Interface is fitted to AMG receivers / transmitters and is signified by a 'N' in the part
number
