AMG Systems Ltd. reserves the right to make changes to this
document without notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG for its use.
Page 1 of 16
AMG3608BERN-DR-SF Instruction
Sheet D18195-02.doc
AMG3608BERN-DR-SF
Instruction Manual
Data Receive Unit with Ethernet plus one Bi-directional
Data Channel and eight Bi-directional Contact Closure
Channels for a Dual Redundant Multimode Fibre Ring -
includes AMG NMS Network Management Interface
The
AMG3608BERN-DR-SF
is a rackmount data receive unit designed to transmit and receive 1 bi-
directional data channel plus 8 bi-directional contact closure channels and provide full duplex
100BaseT Ethernet connectivity with up to 8
AMG3603B5E-DR-SF
or
AMG3603B5ER-DR-SF
rackmount equivalent insert units over a dual redundant multimode optical fibre ring. The data channel
is a multi-drop RS-485 link, each contact closure channel is point to point with the corresponding data
insert unit.
The
AMG3608BERN-DR-SF
is designed to plug into an AMG2009 or AMG2015 subrack, which in turn
fits into a 19" rack system. It also includes an AMG Management Interface to allow Management of the
system using the AMG SNMP enabled Management software.
The
AMG3608BERN-DR-SF
is designed to operate with up to eight
AMG3603B5E-DR-SF
data insert
units. Each receiver will 'drop off' one RS-485 multi-drop channel plus up to eight individual contact
closure channels which are being transmitted around the fibre ring.
