A6 Quick Start: Hart
SAFETY
Copyright
©
2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16
Page 19 of 21
AMFLOW
®
Safety
SAFETY INFORMATION
Usage
Use products only within range of pressure and temperature conditions
indicated on product data sheet.
Do not use with chemicals which are incompatible with 316SS or with
seal materials.
Equipment is certified for Group 2 Category II.
Equipment should not be used in systems requiring a higher level of
certification.
Faults and Damage
The safety features and integrity of products may be compromised by any of the
following:
External damage to body.
Exposure to pressure loads in excess of maximum rated pressure.
Maintenance performed by improperly trained personnel.
Protection from Pressure Releases
To avoid injury due to release of high pressure, use only adaptors and
fittings rated to withstand appropriate pressure.
Ensure all adaptors and fittings are securely connected.
To avoid a violent release of pressure, slowly bleed off pressure before
attaching or removal from pressure line.
Avoid Mechanical Damage
Caution must be observed not to damage any threaded components
during maintenance procedure.
Such damage could compromise the pressure safety factor of filter.
When replacing seals, care must be exercised to avoid damage to
sealing surfaces.
Damage could lead to a sudden release of pressure during operation.
