Service
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
19
400-286-003 Rev. New
5. Remove the four #4-40 hex nuts (843-121-002) and faston tabs (760-022-262) from
keyboard plate (286-002-037).
6. Remove the 4-inch round speaker (770-064-240) to the front bezel (286-002-028) of
the bowler terminal using four #6-32 x ¼ phillips pan head sems (818-227-042).
7. Attach LCD-to-BT board cable assembly (286-002-016) to the 4-inch round speaker
(770-064-240) on one end and attach the other end to LCD final assembly (286-002-
053).
5. Replace the new speaker (770-064-240) to the front bezel (286-002-028) of the front
cover (286-002-027).
6. Replace the four #4-40 hex nuts (843-121-002) and faston tabs (760-022-262) from
the keyboard plate (286-002-037).
7. Replace the front cover (286-002-057) onto the front bezel (286-002-028).
8. Replace the four #8-32x1/2 phillips head sems screws (818-233-082) from the front
cover (286-002-027).
9. Replace the front cover assembly (286-002-040) onto pedestal (286-002-030).
10.
Replace the two #10-24x3/4 phillips head sems screws (818-239-122) into the
bowler terminal front cover assembly (286-002-040).
11. Replace back cover (286-002-026) onto bowler terminal.
12. Replace the four #10-24x3/4 phillips head sems screws (818-239-122) from the
bowler terminal back cover (286-002-026).
13. Turn the power on the bowler terminal and verify that the bowler terminal is working
correctly.
AC Control Box Assembly Replacement
The AC control box assembly can become worn or damaged from normal operation of
the bowler terminal. If the AC control box assembly becomes worn, replace the
component.
WARNING
Do NOT enter the bowler terminal until all power to the
unit is turned off at the main breaker box or serious injury
could result.
