Installation
BOSS Scoring Bowler Terminal Consoles
Installation, Operation, Service, and Parts Manual
3
400-286-003 Rev. New
!
S
TANDARD
B
OWLER
T
ERMINAL
C
ONSOLE
I
NSTALLATION
The installation for standard bowler terminal is easy and simple to perform. Figure 1
shows one way to position the bowler terminal in relation to the ball return. Install the
bowler terminal according to the following procedure:
Figure 1. Example Placement For Standard Bowler Terminal
1.
Position and align standard the bowler terminal so that the rear edge of the bowler
terminal is facing the lanes and the bowler terminal is placed over the cable conduit
approximately 9.75 inches (24.76 cm) from the ball return.
2.
Drill four mounting holes to secure the bowler terminal base to the floor.
3.
Vacuum and remove debris from around drilled holes.
4.
Verify that the power cable from the AC power supply to the bowler terminal is NOT
connected at this time.
