AMF-BRUNS
USER MANUAL
1. Throughout this Manual, reference is made that “an accident” could occur. Any
accident could cause severe personal injury or death, or result in property damage.
2. The product must be installed and repaired only by AMF-Bruns or an authorized dealer.
3. Read entire Manual before using your product.
4. Never attempt any adjustment of this product while the vehicle is moving.
5. If the vehicle was involved in an impact which resulted in the vehicle being towed away from the
scene, the wheelchair tie down and occupant restraint system components -- including straps, belts
and anchorages – must be replaced, even if there is no visual damage.
6. If you experience any malfunction or questionable operation of this product, DO NOT USE THE
VEHICLE. Contact AMF-Bruns of America or an authorized dealer for inspection and repair.
7. Do not modify any components of the product.
8. This product was designed to operate as a single integrated system. Do not substitute any component
with a part supplied by a different manufacturer. Even if the part(s) look identical, their performance and
operation could be different.
9. After one week, the vehicle must be returned to the authorized dealer which installed the product for a
complete inspection of the product.
10. Every six (6) months thereafter, the vehicle must be returned to an authorized dealer for a complete
inspection of the product.
11. Some wheelchairs may not be suitable for use as a seating device in motor vehicles. Refer to the
wheelchair owner’s manual for the manufacturer’s recommendations.
12. Airbags should be disconnected if the wheelchair passenger is positioned less than 7” (175mm)
from the airbag module, or if any after-market device is installed so as to block or compromise
deployment of the airbag.
INTRODUCTION
PURPOSE OF THE MANUAL
The purpose of this manual is to provide the instructions necessary for optimum use and maintenance of
this AMF-BRUNS product. Your AMF-BRUNS product is to be installed and repaired only by a qualifi ed and
trained technician. Never attempt any repairs yourself.
NOTICE: Design details are subject to change. Some illustrations may vary slightly in appearance from the
product you have. This booklet contains the current information at the time of printing. AMF-Bruns reserves
the right to alter or modify components without notice.
LEGEND
To emphasize certain information and procedures regarding the use of this AMF-BRUNS product, the
following symbols may be used in the Manual:
Failure to follow all of the warnings and instructions in this Manual can result in product malfunction
and loss of control of the vehicle – potentially causing an accident, severe personal injury or death to
the vehicle occupants, other motorists or pedestrians.
WARNING
2
I. GENERAL WARNING AND INSTRUCTIONS
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Indicates important information relevant to the product, the
installation, maintenance or other use of the Equipment, or to
sections of this Manual to which particular attention must be paid.
DANGER
WARNING
NOTICE
CAUTION
