Operation
Page 30 of 56
Alu Ramp
Ö
Pull the electrically operated belts out to the wheelchair.
Ö
Attach the electrically operated belts to the wheelchair
(see Figure 15).
Figure 15: Attaching the Electrically Operated Belts to the Wheelchair
Ö
Operate the rocker switch for the electrically operated
belts such that the indicator lamp in the rocker switch
goes out.
DANGER!
Risk of injury through the wheelchair rolling backwards.
The floor section and the access ramp form a slope via
which the wheelchair can roll back out of control.
The passenger in the wheelchair can be severely injured.
Material damage can be caused.
Therefore:
Attach the electrically operated belts to the wheelchair.
Operate the rocker switch for the electrically operated
belts such that the indicator lamp in the rocker switch
goes out.
Do not push the wheelchair up the ramp until this has
been done.
Ö
Push the wheelchair into the vehicle.
Summary of Contents for Alu Ramp
Page 2: ......
