Transportation
Page 22 of 56
Alu Ramp
3
Transportation
Transportation of the Alu Ramp is carried out by the manu-
facturer or by trained, experienced personnel.
4
Installation / Commissioning
The Alu Ramp and Lowering Rear Suspension must be in-
stalled in accordance with the AMF-Bruns Installation In-
structions applicable to the vehicle in question.
DANGER!
Risk of injury through incorrect installation.
A number of risks of personal injury and material damage
can be caused if the Alu Ramp or Lowering Rear Suspension
is incorrectly installed in the vehicle.
Such risks can not only occur during installation but also as
a result of installation not being carried out correctly.
Therefore:
Installation must only be carried out by specialist person-
nel, who have been trained for this purpose by the man-
ufacturer.
The vehicle manufacturer's body fitting guidelines must
be adhered to.
A technical expert must be called in to inspect that instal-
lation has been carried out correctly and that the safety
devices are effective.
The technical expert must confirm the fact that opera-
tional safety of the Alu Ramp and Lowering Rear Suspen-
sion have been established by making a corresponding
entry in the inspection log book (see Chapter
9,
page 43).
The Alu Ramp must not be used until this has been done.
Summary of Contents for Alu Ramp
Page 2: ......
