Amezcua Bio Loght 3, User Manual, Page: 5 / 47

8 9
BATTERY STATE INDICATOR
• Battery level: Green – 40%-100%, Yellow-10%-40%, Red – less than 10%,
• Battery charging: Blinking green/yellow/red light, depending on
the battery level
• Battery charged: Green light stays on when the battery is fully charged
Note: BL3 will not function while the battery is being charged
CHARGING THE AMEZCUA BIO LIGHT 3
With the USB Type C cable, plug the Amezcua Bio Light 3 into a wall
charger or a USB port on a computer or laptop.
Note: BL3 will not function while the battery is being charged
OPERATING FEATURES:
First-time activation on device
Plug in the Type C USB and connect to a wall charger or a USB port on a
computer or laptop.
i) Unlock the top compartment by
rotating the lid anti-clockwise.
ii) Place the Amezcua Bio Disc 3 inside
the Amezcua Bio Light 3 compartment
(convex facing upwards).
iii) Touch and hold the POWER sensor
for 5-7 seconds and shine the Bio Light
3 on the desired part of your body.
iv) Slightly press the COLOR sensor to
choose the light color mode according
to your needs. With each slight press,
the color will change from red, green,
blue, to white.
1. Operating mode procedures
Avoid using the Amezcua Bio Light 3 on the eyes, on metal
implants fixed to joints or bones, over the brain (in case of
malignant tumors), on the head area for individuals with
epilepsy conditions, on the fetus area (if pregnant) and over
the heart (in case of any heart diseases).