BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL YAK 11
ENG
LISH
26
Connect the control linkages of the pitch elevator and yaw
rudder to the rudder areas. The linkage lengths should now be
adjusted exactly until both rudder areas are in the neutral
position.
The linkage must be hooked in fully outside at the ruder horn
(pitch elevator). Secure all screw connections with Loctite. The
servo-tester can now be disconnected from the servos again.
Mount the control rod for the tail wheel.
Now open the cockpit canopy via the closure.
Guide the antenna from the front through the cockpit canopy
and glue this in the fuselage using instant adhesive.
