Ametek Surtronic 25, User Manual

Page: 18 / 60

Surtronic S25
Pick-up Mounting Components
The pick-up is fastened to the drive shaft by the following means:
Mounting Bracket.
This is clamped to the drive shaft by means
of a knurled knob. Although normally used upright, as shown in
figure 3, it can be turned to angle the pick-up or to take it off the
centre line, as shown in figure 3a. It can also be mounted
sideways on the drive shaft, when the right angle pick-up is in
use.
Figure 3: pick up mounting
Pick-up Clamp Drive Shaft
Insert Extension
rod here
Connector Adjustable Mounting
Pick-up Support Bracket
Pick-up
Holder Mounting Bracket
Clamp Screw
Use this mounting position
when the right angled pick-up is used
Page 2-4