User Manual
_________________________________________________________________
fdfefd fd
© 2019 AMETEK Electronic Systems Protection | Technical Support: 1-800-645-9721 | surgex.com 23
3-6-1 . Main interface (home page)
Bypass Mode
Bypass Mode
IP: 208.0V / 50.0Hz IP: 208.0V / 50.0Hz
OP: 208.0V / 50.0 Hz OP: 208.0V / 50.0 Hz
Batt: 273.0V / 99% Batt: 273.0V / 99%
Load: 0% Load: 0%
Warning: 01
1) In the first line the LCD will display the UPS running status mode;
2) When alarms occur, the warning or fault information will be displayed below the “Load” line;
3) When the front panel is not operated for 10 minutes, the display page will return back to the home page;
4) Press the “UP” or “DOWN” button to enter the operation menu (see 3-7-2-1);
5) When the LCD displays the home page and if the UPS is in bypass, press “ON/ENTER” button to turn on
the UPS to AC / converter / battery mode according to the setting and input status, or press “OFF/ESC” to
allow the UPS to bypass mode or shut down. (refer to section on “Single UPS Operation”).
3-6-2. Operation menu
3-6-2-1. Main menu
Line Mode
Control
IP: 208.0V / 50.0Hz
Measurement
OP: 208.0V / 50.0 Hz
Information
Batt: 273.0V / 99%
Setting
Load:
100%
Alarm
1) After pressing the “UP” or “DOWN” button at the home page the LCD will display five items in the operation
Menu: Control / Measurement / Information / Setting / Alarm.
2) Press “UP” or “DOWN” button to select item;
3) Press “ON/ENTER” button to confirm the selection;
4) Press “OFF / ESC” button to return back to the home page;
