Ametek SHPF3 Series, Instruction, Operation And Maintenance Manual

Page: 7 / 40

SHPF3 SCR Power Controller Safety Instructions
Rev 2 Ametek HDR Power Systems 1
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Observe all warnings and cautions in this manual. Failure to do so may result in serious injury or death.
Refer all service to properly trained and qualified service personnel. Never work alone.
Lethal voltages exist on exposed heat sinks even if the power controller is turned off. Remove power and lock
out power before attempting any service.
This manual contains important safety instructions that must be followed during the installation and
maintenance of the SCR Power controller. Read this manual thoroughly before attempting to operate this
Power controller.
An appropriate branch circuit fused disconnect or circuit breaker with this Power Controller is required to
ensure the safety of operating personnel.
CAUTION
HAZARDOUS VOLTAGES
exist at the Power Controller Load,
AT ALL TIMES
, when input voltage is
connected. This condition exists even when the Power Controller is set to deliver zero output.
Printed circuit boards contain sensitive components that can be damaged by electrostatic discharge (ESD).
Observe precautions for handling electrostatic sensitive devices. Reference Maintenance and Troubleshooting
(Chapter 7) of this manual for details
In case of fire, use a dry chemical fire extinguisher to put out the fire. Using a liquid fire extinguisher may
cause electric shock.
The SCR Power Controller makes use of components dangerous for the environment (electronic printed circuit
boards, electronic components). The components removed must be taken to specialized collection and
disposal centers.
E151547
100kA SCCR
IEC 947-5-1
Made in U.S.A.