16060-101 Rev. M
8
Instrument Setup
Great care has been taken to deliver your new Reichert 7CR to you safely. The container and
packaging was specially designed to transport this unit. Please retain the packaging if future
transportation is required.
Unpacking Instructions
Please remove the packaging material from the instrument in the following
manner (Refer to images on left).
The instrument is packaged in a shipping container to protect the
instrument from damage during shipment. Please read the User’s Guide
before operating the unit. A Quick Reference Card is provided for your
convenience and reference during operation of the unit.
1. Remove the accessories from the shipping container.
Accessories box contains:
•
Printer Paper (P/N 12430-887)
•
Dust Cover (P/N 16050-089)
•
Quick Reference Card (P/N 16060-104)
•
User’s Guide (P/N 16060-101)
•
Forehead Rest Pad (Spare) (P/N 16050-170)
•
Power Cord (P/N RCBL10040 - 110V) or (P/N RCBL10041 - 230V)
Note:
Power cord not to exceed 10 ft.
2.
Remove the Top Foam (4 corners) from the shipping container.
3. Locate the handles on the sides of the inner box and remove the
inner box.
4. Lay the inner box on its side and remove the tape.
5. Remove the foam top and bottom inserts from the inner box.
6. Lift the Reichert 7CR out of the inner box.
7. Take the Reichert 7CR out of the plastic bag and set the unit on a
secure table.
8. Place the packing material in a safe place so that if transportation is
required in the future, it will be available.
Inner Box
Opened Inner Box
Shipping Container
Inner Box
Accessories Box
