A01-00150 Rev B
13
1) 120V and 208V Output
Figure 1: Output wiring – 120V & 208V
NOTE 1:
Static Switch Output (SSO) Tap Selection must match
expected output voltage. Install a jumper between 0-208V
or 0-240V.
NOTE 2:
208 is obtained by using the 120 and 88 terminals.
NOTE 3:
Make sure that the wires are connected tightly to the
terminals.
NOTE 4:
Install the output breaker between the output terminal and
the load. The breaker should be qualified with leakage
current protection if necessary.
Summary of Contents for POWERVAR ABCDEF10.2-22
Page 47: ...A01 00150 Rev B 45...
