Ametek PHANTOM Miro C321, User Manual, Page: 29 / 70

Chapter 6: Signals & Programmable I/O | 25
S
I
G
NAL
S
&
PR
OG
R
A
M
M
A
B
LE
I/
O
INTRODUCTION TO SIGNALS
Phantom cameras incorporate multiple hardware signals to interface to external devices.
Ports on Phantom Miro C321 cameras are programmable. The equipment to access these
ports – the MiniBoB, Control BoB, and Junction Box – have ports that are either fixed or
programmable. The Programmable I/O ports have a default setting which will be set after
a factory reset or by using the ‘signal default’ function in PCC.
Port Map for Programmable I/O Access
MINIBoB
Port Label Default setting
Programmable
I/O Capability
Programmable
IO Port in PCC
Trigger Trigger Fixed Port 1
TC In TC In Fixed Port 2
TC Out TC Out Prog. I/O Port 3
Aux 1 Strobe Prog. I/O Port 4
Aux 2 Ready Prog. I/O Port 5
CONTROL BoB
Port Label Default setting
Programmable
I/O Capability
Programmable
IO Port in PCC
Trigger Fixed Fixed Port 1
TC In Fixed Fixed Port 2
Ready Ready Prog. I/O Port 5
TC Out TC Out Prog. I/O Port 3
Aux Out Strobe Prog. I/O (out) Port 4
Aux In N/A Prog. I/O (in) Port 4