Ametek PHANTOM Miro C321, User Manual

Page: 11 / 70

Chapter 2: Connectors | 7
B
TRIGGER
C
AUX
D
ETHERNET
E
SYSTEM
F
POWER 20-36VDC
G
1
H
2
I
3
J
4
K
5
L
6
A
READY
BNC connector; closed’ for ready, ‘open’ for not ready; covers all cameras
connected to this JBox and any JBox up-chain of this one.
BNC connector; contact closure causes trigger. BNC connector also
accepts TTL pulses (rising / falling edge) for trigger. There is also Trigger
on System connector: isolated, <1V deassert, 3 to 24V assert.
Selectable strobe or FSYNC for synchronization with equipment such as pulsed
LED lighting.
Ruggedized RJ45 connector connects GigE to acontrol unit computer /
laptop for camera control communication.
Same Fischer connector as Camera port. Connects to a Camera Port on
second JBox to daisy chain or branch the system for additional cameras.
Protected for reverse polarity, overcurrent (10A), undervoltage
and overvoltage to 50V. Independent power is required for each
Junction Box.
Fischer connectors; each Miro JBox has six (1-6) Camera ports which carry
Ethernet, power, serial, and Miro camera signals on capture connector. There are
two status LEDs for each camera port – Ethernet and camera status. One port can
be used to daisy chain or branch to another JBox’s System port.