Ametek Mocon Dansensor MAP Mix 9001 ME, User Manual

Page: 17 / 28

Dansensor
®
MAP Mix 9001 ME EN User Manual 15
P/N 250151-P
10/2021
4. Control panel
(A) Alarm monitoring on - the green lamp lights up when alarm monitoring is on.
(B) On/off (reset) button - for alarm monitoring (gas pressure monitoring).
(C) Alarm output on - the red lamp lights up when the alarm relay is activated due to

missing gas pressure.
Fig. 6. Control panel
The lamp " 1 " lights up at too low pressure on "

GAS IN ".
The lamp " 2 " lights up at too low pressure on "

GAS IN ".
The lamp " 3 " lights up at too low pressure on gas "

GAS IN " (3-gas mixer only).
The lamp " F " lights up, when the solenoid valve for gas flow is open (optional).
Flow control
Turn the FLOW dial for setting of the wanted gas flow.
The scale shows an approx. % value of the mixer's capacity.
ATTENTION! Gas mixers without the flow control function do not have this button.


Setting 2-gas mix
Turn the MIX -dial for setting of the wanted mixture proportion in % of the gas indicated on
the scale. The remaining percentage constitutes the other gas.
Example: 30% CO
2
- 70% N
2
1. On the MIX scale it says N
2
, i.e. it must be set to 70%.
2. The rest (30%) will be CO
2
.
2-gas with flowcontrol 3-gas with flowcontrol