Page 28
Signal Processor
User Guide
LMG GS
The processor requires an ‘access code’ to be entered before it allows you into
the configuration menus.
Use the
UP
and
DOWN
keys to change the displayed access code value to
417
.
Press the
ENTER
key. The Main Configuration Menu will now be displayed.
See Fig. 21.
Fig. 21 shows the Main Configuration Menu for a processor connected to four
thermometers and fitted with a serial communications card. Your system may
differ from this (dependant upon the number of channels/options fitted).
Fig. 21 - Main configuration menu
238021
NOTE
A ‘Time-out’ feature returns you to the original screen if 60 seconds
elapse without a key being pressed. If this occurs, the access code must
be re-entered in order to regain access to the configuration menus.
Summary of Contents for Land LMG GS
