Ametek Land Landcal P80P, User Manual, Page: 17 / 24

Page 11
User Guide Landcal P80P
Calibration Source
9 Eurotherm Temperature Controller Type 3216CC
EUROTHERM
OP1
Output light Measured temperature
Setpoint temperature
Scroll Page Down Up
Fig. 3 'Eurotherm' Controller - front panel controls
9.1 Introduction
When switched on, the controller lights up, goes through a short test routine,
and then displays the measured temperature and starts to control. The
output light glows or flashes as heating occurs.
In
Level 1 operation, both the setpoint temperature and the actual measured
temperature are displayed.
The
Page key allows access to the Level 2 mode of operation. When in
Level 2 , the parameter lists within the controller can be displayed.
The Scroll key allows access to the adjustable parameters within the
controller. Most lists and parameters are hidden and cannot be accessed by
the operator even when in Level 2 mode of operation. These hidden features
contain factory-set parameters which should not be changed.
The
Up and Down keys are used to alter the setpoint temperature in Level 1
operation and parameter values when in Level 2 operation.
To enter the Level 2 mode of operation:
1) Press and hold the Page key for 3 seconds.
2) The display will show Leu 1 Goto . Release the Page key.
3) Press the Up or Down button to choose Leu 2 (Level 2).
4) Press the Up or Down button to enter the Level 2 access code, which is 9 .
The Home page is displayed.